Live project · stock CAD
Stock CAD for steps, coping and pillars.
StoCAD is the drawing desk for stone doorsteps, the opening, and the wall around them. It is open at app.stocad.co.uk. Set the steps, crown a wall with coping, place a pillar, then send the cut list to STOCut. The brochure is still to come.
The product
Overview
StoCAD — the title on the desk is StoCAD — Stock CAD — sets out stone around a door: the opening, the wall finish, the steps below, coping on a wall, and pillar caps. Phil Stone built it. The desk links back here.
The working app is at app.stocad.co.uk. Draw the boxes first, then dress stone from the walking surface downward, so a tread can change without rebuilding the stack under it. Plan, front elevation and side elevation can leave as one drawing per sheet, or four drawings on one sheet, with your logo or name if you want it on the paper.
When the pieces are right, send the job to STOCut. STOCut stays the cutting-plan product. This page is the public write-up while the brochure site is still to come.
- 01Set the opening
Door width, reveals, and the wall finish up the opening.
- 02Dress the stone
Steps and landings, coping courses, and a pillar cap.
- 03Send to STOCut
Pieces and edges go across. You still own the sizes.
On the desk
Features
- Door opening
Door width, left and right reveals, and the wall height up the opening. On the desk that height is the wall finish — not the step.
- Steps and landing
Levels with rise and going. The top landing sits at the door. Depth runs from the threshold lip out to the front of each box. Add a step below when the flight needs it.
- Coping
Crown a wall with coping: thickness, width, overhang and courses. A low wall, a planter or a retaining edge can take it. Joints and adhesive sit in the count.
- Pillars
Set the pillar cap, place it, and check it on the front elevation and in 3D before you export. Street piers beside a doorstep are the same family of work.
- Plan and elevations
Plan, front and side. Export one drawing per sheet or four on one sheet. Named stones on the desk include Indian sandstone, Kilkenny limestone and Egyptian limestone.
- Send to STOCut
Sign in, then send the job. Pieces carry their edges so STOCut can plan the cuts. Download the cutting plan as well. STOCut remains the saw-sheet product.
What's shipping
Updated features
- Against a wall
Square off a side that abuts a wall. That edge drops its profile, overhang and extra joint, so the flight can sit tight to the house.
- Wings and returns
The front can be a centre piece with a wing each side, plus returns. The joints show on the front, where the customer will see them.
- Coping courses
Add coping to crown a wall you have already drawn. Courses stack with the thickness, width and overhang you set, including on a raised planter or a retaining edge.
- Pillar caps
Size the cap, place it, and read it on the front elevation and in 3D. The fab card follows the same sizes.
- Sizes already on the job
Door sizes can come from the site spec stored on the job, so you are not typing the opening again when you reach the step.
Where it stands
Progress
- LiveDrawing desk
Open at app.stocad.co.uk. The title on the app is StoCAD — Stock CAD.
- LiveSteps, coping and pillars
Doorsteps, coping on walls, and pillar caps are on the desk, with plan and elevations to match.
- LiveSend to STOCut
Sign in and send the job. The cutting list stays with STOCut; the drawing stays with StoCAD.
- ComingBrochure
The brochure site is still to come. Until it is ready, work on the desk and read this page.
In plain figures
Stats
- DeskLive
app.stocad.co.uk — open in the browser.
- StepsDoorsteps
Rise, going and landings, dressed from the walking surface down.
- CopingOn the wall
Courses, width and overhang on walls, planters and retaining edges.
- PillarsCaps
Place the cap, then check the front elevation and 3D.
- HandoffSend → STOCut
Pieces and edges go to the cutting-plan product.
- BrochureComing
The public brochure is not ready yet. The desk is.
Recent
Updates
- Desk open for steps, coping and pillars
The stock CAD desk at app.stocad.co.uk covers the door opening, stepped formwork, coping and pillar caps, with plan and elevations. Send the finished pieces to STOCut. The brochure site is still to come, so this page is the write-up.
The step change
Major updates and improvements
- A desk for setting out stone
app.stocad.co.uk is open for the opening, the wall around the door, and the steps below it. Formwork first, then the stone dress.
- Steps, coping and pillars
The same job can carry a flight, coping on the wall beside it, and a pillar cap. That is the work the desk is for.
- Send to STOCut
When the pieces are right, send them. StoCAD draws. STOCut cuts. The two stay separate on purpose.
- Brochure still to come
There is no brochure site to send a customer to yet. Share this page, and open the desk, until that site is published.
What the desk draws is what you see at app.stocad.co.uk, checked 22 September 2026. There is no public price list yet, so this page does not quote one.
Open the desk
Set out the doorstep at app.stocad.co.uk. When the pieces are ready, send them to STOCut.